Message ID | Message |
12100 | DAM generator bid upper operating limit < DAM generator schedule energy and DAM generator bid upper operating limit < DAM generator scheduled bid's upper operating limit |
12101 | HAM generator bid upper operating limit < HAM generator schedule energy. |
12102 | The bid's Bid Energy Curve is not allowed to increase price at any points in the region where the unit has already been scheduled. |
12103 | The energy cost curve bid is not allowed to increase price at any points in the region where the unit has already been scheduled. |
12104 | Decremental Dispatchable Blocks $/MW cannot increase from original commitment bid. |
12105 | Decremental Energy Cost Curve $/MW cannot increase from original commitment bid. |
12106 | Submitted 10 Minute Spinning Reserve $/MW cannot increase from DAM scheduled bid. |
12107 | Submitted 10 Minute Non-Synchronized Reserve $/MW cannot increase from DAM scheduled bid. |
12108 | Submitted 30 Minute Spinning Reserve $/MW cannot increase from DAM scheduled bid. |
12109 | Generator not DAM Dispatchable Energy Bid Qualified. |
12110 | Generator not HAM Dispatchable Energy Bid Qualified. |
12111 | Generator not commited for energy in DAM market. |
12112 | DAM generator bid's dispatch block MWs must be >= 1 and curve must be monotomically increasing. |
12113 | HAM generator bid's dispatch block MWs must be >= 1 and curve must be monotomically increasing. |
12114 | DAM generator bid's dispatch curve MWs must be >= 1 and curve must be monotomically increasing. |
12115 | HAM generator bid's dispatch curve MWs must be >= 1 and curve must be monotomically increasing. |
12116 | DAM_GENERATOR_BIDS decrmtl_single_price_MWs must be >= 1 and monotomically increasing. |
12117 | HAM_GENERATOR_BIDS decrmtl_single_price_MWs must be >= 1 and monotomically increasing. |
12118 | DAM_GENERATOR_BIDS decrmtl_curve_price_MWs must be >= 1 and monotomically increasing. |
12119 | HAM_GENERATOR_BIDS decrmtl_curve_price_MWs must be >= 1 and monotomically increasing. |
12120 | Generator not DAM Fixed Energy Bid Qualified. |
12121 | Generator not HAM Fixed Energy Bid Qualified. |
12122 | DAM generator bid's fixed minimum block MW must be >= generator's physical min gen. |
12123 | HAM generator bid's fixed minimum block MW must be >= generator's physical min gen. |
12124 | DAM generator bid's fixed minimum block MW set = to generator's physical min gen. |
12125 | HAM generator bid's fixed minimum block MW set = to generator's physical min gen. |
12126 | Energy and decremental bid curves combined into one monotonically increasing curve. |
12127 | No dispatch curve allowed in bid when generator committed for energy in DAM. |
12128 | No 10 minute spinning reserve allowed in bid when generator committed for energy in DAM. |
12129 | No 10 minute non-synchronized reserve allowed in bid when generator committed for energy in DAM. |
12130 | No 30 minute spinning reserve allowed in bid when generator committed for energy in DAM. |
12131 | Upper operating limit in DAM bid > seasonal limit. |
12132 | Upper operating limit in HAM bid > seasonal limit. |
12133 | Highest point on dispatch curve in DAM bid must be > fixed minimum generation block MW. |
12134 | Highest point on dispatch curve in HAM bid must be > fixed minimum generation block MW. |
12135 | The upper operating limit supplied with a HAM bid must be >= the sum of energy and ancillary service schedules in the DAM. |
12136 | The on dispatch status cannot be changed from the DAM schedule. |
12137 | The maximum Bid Energy curve MWs bid cannot be < the total MWs scheduled in the DAM. |
12138 | 30 Minute Non-Synch Reserve Not able to start in time. Start up notification time is > .5 hours. |
12140 | Minimum generation MW cannot change from DAM scheduled bid. |
12141 | Regulation Capacity price cannot increase from DAM scheduled bid. |
12142 | Minimum generation price cannot increase from DAM scheduled bid. |
12143 | 10 minute Spinning reserves MW cannot decrease from DAM scheduled amount. |
12144 | 10 minute Non-synchronized reserves MW cannot decrease from DAM scheduled amount. |
12145 | 30 minute spinning reserves MW cannot decrease from DAM scheduled amount. |
12146 | Regulation Capacity MW cannot decrease from DAM scheduled amount. |
12147 | Invalid bid parameters for Quick Start Unit. Must be On-dispatch in Real Time, Min gen MWs must = 0, min gen cost must = 0, must be a single point block bid = to the upper operating limit. |
12148 | Invalid bid parameters for 30 Minute Start Unit. Must have Min gen MWs must = 0, min gen cost must = 0, must be a single point block bid = to the upper operating limit. |
12149 | Zero start-up cost must be 'Y' for all HAM bids for quick start generators. |
12150 | Zero start-up cost must be 'Y' for all DAM bids for quick start generators submitted after market close. |
12151 | Zero start-up cost must be 'Y' and fixed minimum generation MWs must be 0 for all DAM bids bidding 10 Minute Non-Synch when submitted after market close. |
12152 | Regulation availability MW cannot decrease from HAM scheduled amount. |
12153 | Regulation Movement price cannot increase from DAM scheduled bid. |
12160 | Upper Bid Limit has been increased on CLR as a result of DAM schedule. |
12161 | Highest point on dispatch curve in DAM bid > seasonal limit. |
12162 | Highest point on dispatch curve in HAM bid > seasonal limit. |
12163 | DAM Schedule above DAM bid-in UOL causes copied DAM bid for SRE to be invalid |
12164 | UOL(n) bid must be <= Max Summer Operating Limit |
12165 | UOL(e) bid must be <= Max Summer Operating Limit |
12166 | Highest point on Bid Energy curve must be <= Max Summer Operating Limit |
12167 | UOL(n) must be <= Max Winter Operating Limit |
12168 | UOL(e) must be <= Max Winter Operating Limit |
12169 | Highest point on Bid Energy curve must be <= Max Winter Operating Limit |
12170 | UOL(n) of submitted bid must be >= sum of DAM accepted energy and reserves and regulation schedules |
12171 | First Bid Energy Curve $/MW value is less than the negative price cap. |
12172 | Last Bid Energy Curve $/MW Value exceeds price cap. |
12173 | For Wind generator bids, fixed minimum generation cost and MW must be zero. |
12174 | Wind resource bids must be ISO Committed Flex (BID_SCHEDULE_TYPE_ID = 3). |
12175 | Real-time Minimum Run Qualified Gens - Cannot change bid type of previously submitted HAM bid. |
12176 | Real-time Minimum Run Qualified Gens - Start-up cost must be <= previously submitted start-up cost in HAM bid |
12177 | Real-time Minimum Run Qualified Gens - Self-Committed HAM bid's Self-Commit MW must be >= previously submitted Self-Commit HAM bid's MW. |
12178 | Real-time Minimum Run Qualified Gens - UOL(n) of submitted HAM bid must be >= UOL(n) of previously submitted HAM bid. |
12179 | Real-time Minimum Run Qualified Gens - UOL(e) of submitted HAM bid must be >= UOL(e) of previously submitted HAM bid. |
12180 | Real-time Minimum Run Qualified Gens - Minimum generation MW cannot change from previously submitted HAM bid. |
12181 | Real-time Minimum Run Qualified Gens - Minimum generation price cannot increase from previously submitted HAM bid. |
12182 | Real-time Minimum Run Qualified Gens - The bid's Bid Energy Curve is not allowed to increase price over previously submitted bid. |
12183 | Real-time Minimum Run Qualified Gens - Regulation Capacity MW cannot decrease from previously submitted HAM Bid amount. |
12184 | Real-time Minimum Run Qualified Gens - Regulation Capacity Cost cannot increase from previously submitted HAM Bid. |
12185 | Real-time Minimum Rule Qualified Gens - Regulation Movement Cost cannot increase from previously submitted HAM Bid. |
12200 | Generator not qualified to bid DAM 30 Minute Spinning Reserve. |
12201 | Generator not qualified to bid HAM 30 Minute Spinning Reserve. |
12202 | DAM 10 Minute Spinning Block Bid must have a Fixed Energy Bid Only. |
12203 | HAM 10 Minute Spinning Block Bid must have a Fixed Energy Bid Only. |
12204 | DAM 10 Minute Spinning Block Reserve Bid must be >= 1 & <= 10 * Emergency Response Rate. |
12205 | HAM 10 Minute Spinning Block Reserve Bid must be >= 1 & <= 10 * Emergency Response Rate. |
12207 | DAM 10 Minute Non-Synch Reserve Bid must be >= 1 & <= 10 * Emergency Response Rate. |
12208 | HAM 10 Minute Non-Synch Reserve Bid must be >= 1 & <= 10 * Emergency Response Rate. |
12209 | DAM 10 Minute Spinning Block Reserve Bid $/MW must be > 0. |
12210 | HAM 10 Minute Spinning Block Reserve Bid $/MW must be > 0. |
12211 | DAM 10 Minute Non-Synch Reserve Bid $/MW must be > 0. |
12212 | HAM 10 Minute Non-Synch Reserve Bid $/MW must be > 0. |
12213 | DAM 30 Minute Operating Reserve Bid $/MW must be > 0. |
12214 | HAM 30 Minute Operating Reserve Bid $/MW must be > 0. |
12215 | Generator not qualified to bid DAM 10 minute spinning reserve. |
12216 | Generator not qualified to bid HAM 10 minute spinning reserve. |
12217 | Generator not qualified to bid DAM 10 minute non-synchronized reserve. |
12218 | Generator not qualified to bid HAM 10 minute non-synchronized reserve. |
12219 | HAM 30 Minute Spinning Block Reserve Bid must be >= 1 & <= 30 * Emergency Response Rate. |
12220 | HAM 30 Minute Spinning Block Reserve Bid must be >= 1 & <= 30 * Emergency Response Rate. |
12221 | DAM 30 Minute Non-Synch Reserve Bid must be >= 1 & <= 30 * Emergency Response Rate. |
12222 | HAM 30 Minute Non-Synch Reserve Bid must be >= 1 & <= 30 * Emergency Response Rate. |
12300 | Generator not qualified to bid DAM Regulation. |
12310 | Generator not qualified to bid HAM Regulation. |
12311 | DAM Regulation Bid Cannot Have Minimum Generation MW = 0. |
12312 | HAM Regulation Bid Cannot Have Minimum Generation MW = 0. |
12313 | DAM Regulation Bid MW/Min set = to Max Regulation Response Rate. |
12314 | DAM regulation bid MW must be less than 5 * generators max regulation response rate. |
12315 | HAM regulation bid MW must be less than 5 * generators max regulation response rate. |
12316 | Generator bid does not have associated generator UC data. |
12317 | DAM generator bid expired. |
12405 | Sum of transaction bids' energy MWs must be <= DAM generator bid's energy bid MWs. |
12409 | Sum of transaction bids' energy MWs must be <= NONFIRM generator bid's energy bid MWs. |
12410 | Sum of transaction bids' energy MWs must be <= HAM generator bid's energy bid MWs. |
12500 | Generator not qualified to bid DAM 30 minute non-synchronized reserve. |
12501 | Generator not qualified to bid HAM 30 minute non-synchronized reserve. |
12502 | No 30 minute non-synchronized reserve allowed in bid when generator committed for energy in DAM. |
12503 | 30 minute Non-synchronized reserves MW cannot decrease from DAM scheduled amount. |
12504 | Submitted 30 Minute Non-Synchronized Reserve $/MW cannot increase from DAM scheduled bid |
12505 | Group Gen. Unit must have max_summer/winter_oper_limit = 0 |
12506 | Non-Group Gen. Unit must have max_summer/winter_oper_limit >=2.0 and > phys._min_gen |
12600 | Generator schedule updated by SRE. |
12610 | Minimum Generation MW must be 0 for DSASP NON_SYNC Reserve bid |
12611 | Minimum Generation MW must be 0 for DSASP Spinning Reserve only bid |
12612 | DSASP units behind the fence ( off grid LOCAL_GENERATOR_FOR_DEMAND_SIDE) cannot bid spinning reserves |
12613 | DSASP units must provide reserves and/or regulation values |
12614 | For DSASP units bidding synchronous reserves and/or regulation, Start Up Cost Value associated with bid must = 0. |
12615 | Use In Unaccounted Energy Flag Must = N if bus is a Metering Point type load bus (load type 6) |
12616 | Cannot create LSE-Bus relationship if Bus is a Metering Point type load bus (load type 6) |
12617 | Must be a DSASP ( type 0 ) Generator to have the LOCAL_GENERATOR_FOR_DEMAND_SIDE parameter |
12618 | Bid not accepted - failing validation for TDRP event |
12619 | Bid not accepted - failing validation for SCR/EDRP event |
12620 | Cannot manipulate historical Generator Attributes |
12621 | For DSASP regulation bid, Minimum Generation MW must be less than 0. |
12622 | For DSASP regulation bid, UOL(n) must be greater than or equal to 1. |
12623 | For DSASP bids, mw bid curve points less than or equal to zero must have price less than or equal to the Bid Floor Price times minus one |
12624 | For DSASP bids, mw bid curve points greater than zero to must have price greater than or equal to the Bid Floor Price. |
12625 | For DSASP units, Minimum Generation Cost value must = 0. |
12626 | DSASP Bids must be ISO Committed Flex ( BID_SCHEDULE_TYPE_ID = 3 ) |
12627 | DSASP Bid curve must include zero transition point with $ below Bid Floor Price times minus one. |
12628 | For DSASP units bidding regulation and/or spinning reserves, Minimum Generation Cost value must = 0. |
12629 | For DSASP units bidding Non-Synchronous reserves, Minimum Generation Cost value must be greater than or equal to the Bid Floor Price. |
12630 | For DSASP units bidding Non-Synchronous reserves, bid curve mw value cannot be less than 0. |
12700 | Market Power Mitigation Generators must bid 10 minute spinning = 10 * emergency response rate with bid dollars = 0. |
12701 | In-city DAM Energy Mitigation |
12702 | Generator bid min Gen subject to market power mitigation on billing statement. |
12703 | Generator bid startup costs subject to market power mitigation on billing statement. |
12704 | Generator bid startup costs subject to Local Reliability mitigation on billing statement. |
12705 | DAM 10 Minute Spinning Reserve bid has been mitigated to price cap value. |
12706 | DAM 10 Minute Non-Synch Reserve bid price has been mitigated to price cap value. |
12707 | HAM 10 Minute Spinning Reserve bid has been mitigated to price cap value. |
12708 | HAM 10 Minute Non-Synch Reserve bid price has been mitigated to price cap value. |
12709 | DAM 30 Minute Spinning Reserve bid has been mitigated to price cap value. |
12710 | DAM 30 Minute Non-Synch Reserve bid price has been mitigated to price cap value. |
12711 | HAM 30 Minute Spinning Reserve bid has been mitigated to price cap value. |
12712 | HAM 30 Minute Non-Synch Reserve bid price has been mitigated to price cap value. |
12713 | PURPA Generator BID parameters have been modified based on generator not responding to NYISO basepoints and MP not supplying a different bid to indicate unit will start following basepoints. |
12714 | In-city DAM Start-up Mitigation |
12715 | In-city DAM Min-Gen Mitigation |
12719 | GENERATOR gen_id = <P1> in not MMU MITIGATED GT GEN TYPE = 6,8 |
12720 | GENERATOR gen_id = <P1> IS NOT MMU MITIGATED STEAM GEN TYPE 10. |
12721 | 10 Minute Spinning Reserve bid price exceeded target and has been mitigated to the reference price. |
12722 | 10 Minute Non-Synch Reserve bid price exceeded target and has been mitigated to the reference price. |
12723 | 30 Minute Spinning Reserve bid price exceeded target and has been mitigated to the reference price. |
12724 | 30 Minute Non-Synch Reserve bid price exceeded target and has been mitigated to the reference price. |
12725 | Regulation Availability bid price exceeded target and has been mitigated to the reference price. |
12726 | DAM Energy Mitigation |
12727 | Dispatch Curve bid price exceeded target and was mitigated by circuit breaker mitigation. |
12728 | Dispatch Curve bid price exceeded target and was mitigated by Real Time mitigation. |
12729 | HAM Energy Mitigation |
12740 | Bid Energy prices have been modified due to Thunderstorm Alert Mitigation. |
12741 | Bid Energy prices have been modified due to Severe Weather Alert Mitigation. |
12750 | DAM 30 Minute Spinning Reserve bid price has been mitigated to East Clearing Price. |
12751 | DAM 30 Minute Non-Synch Reserve bid price has been mitigated to East Clearing Price. |
12752 | DAM 10 Minute Spinning Reserve bid price has been mitigated to East Clearing Price. |
12753 | DAM 10 Minute Non-Synch Reserve bid price has been mitigated to East Clearing Price. |
12760 | DAM 30 Minute Spinning Reserve bid price has been mitigated to East Clearing Price. |
12761 | DAM 30 Minute Non-Synch Reserve bid price has been mitigated to East Clearing Price. |
12762 | DAM 10 Minute Spinning Reserve bid price has been mitigated to East Clearing Price. |
12763 | DAM 10 Minute Non-Synch Reserve bid price has been mitigated to East Clearing Price. |
12764 | DAM 30 Minute Spinning Reserve bid price has been mitigated to East Clearing Price for potential use in SRE. |
12765 | DAM 30 Minute Non-Synch Reserve bid price has been mitigated to East Clearing Price for potential use in SRE. |
12766 | DAM 10 Minute Spinning Reserve bid price has been mitigated to East Clearing Price for potential use in SRE. |
12767 | DAM 10 Minute Non-Synch Reserve bid price has been mitigated to East Clearing Price for potential use in SRE. |
12770 | MinRunTime updated: Later bid submitted had different MinRunTime. |
12771 | MinRunTime Bid Invalidated: Later bid submitted had different MW Request or $$ Bid. |
12780 | Bid Mitigated For Statewide Mitigation. |
12781 | Bid Mitigated For SRE. |
12782 | Bid Mitigated For OOM. |
12784 | Bid Mitigated For Local Reliability. |
12785 | Bid Mitigated for OOM/SRE Unconstrained Mitigation |
12786 | Bid mitigated for DARU Statewide Mitigation |
12787 | Bid mitigated for SRE Statewide Mitigation |
12800 | DAM Energy Bid $ exceeds price cap. |
12801 | DAM Minimum Generation $ exceeds price cap. |
12802 | DAM 10 Minute Spinning Bid $ exceeds price cap. |
12803 | DAM 10 Minute Non-Synch Bid $ exceeds price cap |
12804 | DAM 30 Minute Spinning Bid $ exceeds price cap. |
12805 | DAM 30 Minute Non-Synch Bid $ exceeds price cap |
12806 | DAM Regulation Capacity Bid $ exceeds price cap. |
12807 | HAM Energy Bid $ exceeds price cap. |
12808 | HAM Minimum Generation $ exceeds price cap. |
12809 | HAM 10 Minute Spinning Bid $ exceeds price cap. |
12810 | HAM 10 Minute Non-Synch Bid $ exceeds price cap |
12811 | HAM 30 Minute Spinning Bid $ exceeds price cap. |
12812 | HAM 30 Minute Non-Synch Bid $ exceeds price cap |
12813 | HAM Regulation Capacity Bid $ exceeds price cap. |
12814 | DAM Regulation Movement Bid $ exceeds price cap. |
12815 | DAM Regulation Movement Bid $ is less than the negative price cap. |
12816 | HAM Regulation Movement Bid $ exceeds price cap. |
12817 | HAM Regulation Movement Bid $ is less than the negative price cap. |
12820 | DAM Energy Bid $ is less than the negative price cap. |
12821 | DAM Minimum Generation $ is less than the negative price cap. |
12822 | DAM 10 Minute Spinning Bid $ is less than the negative price cap. |
12823 | DAM 10 Minute Non-Synch Bid $ is less than the negative price cap. |
12824 | DAM 30 Minute Spinning Bid $ is less than the negative price cap. |
12825 | DAM 30 Minute Non-Synch Bid $ is less than the negative price cap. |
12826 | DAM Regulation Capacity Bid $ is less than the negative price cap. |
12827 | HAM Energy Bid $ is less than the negative price cap. |
12828 | HAM Minimum Generation $ is less than the negative price cap. |
12829 | HAM 10 Minute Spinning Bid $ is less than the negative price cap. |
12830 | HAM 10 Minute Non-Synch Bid $ is less than the negative price cap. |
12831 | HAM 30 Minute Spinning Bid $ is less than the negative price cap. |
12832 | HAM 30 Minute Non-Synch Bid $ is less than the negative price cap. |
12833 | HAM Regulation Capacity Bid $ is less than the negative price cap. |
12834 | Curtailment bid price must be greater than zonal bid_floor_price. |
12835 | All curtailment Bid Energy Curve prices must be greater than zonal bid_floor_price. |
12836 | Incremental energy costs on the HAM bid were increased relative to the bid costs submitted in the DAM on the generators DAM-committed MWs |
12837 | The IBRT message associated with the bid has been deleted or added by MMA |
13001 | Bid has been operator adjusted - COMMITED FOR ISO RELIABILITY. |
13002 | Bid has been operator adjusted due to OOM FOR TO RELIABILITY. |
13003 | Bid has been operator adjusted due to GENERATOR REQUEST. |
13004 | Bid has been operator adjusted due to OOM FOR RESERVES. |
13005 | Bid has been operator adjusted for ISO SECURITY |
13020 | Bid has been operator adjusted due to CAPACITY LIMITED RESOURCE. |
13021 | Bid has been operator adjusted due to ISO ENERGY LIMITED RESOURCE. |
13022 | Bid has been operator adjusted due to TO ENERGY LIMITED RESOURCE. |
13023 | Bid has been operator adjusted due to ISO VOLTAGE SUPPORT. |
13024 | Bid has been operator adjusted due to TO VOLTAGE SUPPORT. |
13025 | Bid has been operator adjusted due to OOM FOR TESTING. |
13026 | Bid has been operator adjusted due to ISO COM FAILURE. |
13027 | Bid has been operator adjusted due to TO COM FAILURE. |
13028 | Bid has been operator adjusted due to GEN REQUEST/DECREASE UOL. |
13029 | Bid has been operator adjusted due to GEN REQUEST/INCREASE MINGEN. |
13030 | Bid has been operator adjusted due to GEN REQUEST/MODIFY LIMITS. |
13031 | Bid has been operator adjusted due to OPS INTERVENE/DECREASE UOL. |
13032 | Bid has been operator adjusted due to OPS INTERVENE/INCREASE MINGEN. |
13033 | Bid has been operator adjusted due to OPS INTERVENE/MODIFY LIMITS. |
13040 | Bid has been operator adjusted due to NYISO GEN AUDIT. |
13042 | Units bid on dispatch are deemed to have also bid their full capacity as 30 minute reserves at 0 dollars. |
13043 | Bid has been adjusted due to BACKUP DISPATCH SYSTEM. |
13050 | Bid has been operator adjusted due to START UP/SHUT DOWN. |
13051 | EAST RIVER LOAD POCKET |
13052 | STATEN ISLAND LOAD POCKET |
13053 | IN-CITY 345/138 LOAD POCKET |
13054 | GREENWOOD/STATEN ISLAND LOAD POCKET |
13055 | VERNON/GREENWOOD LOAD POCKET |
13056 | ASTORIA EAST/CORONA/JAMAICA LOAD POCKET |
13057 | ASTORIA WEST/QUEENBRIDGE LOAD POCKET |
13058 | ASTORIA WEST/QUEENBRIDGEe/VERNON LOAD POCKET |
13059 | TRANSMISSION CONSTRAINT LINE |
13060 | INTERFACE CONSTRAINT |
13061 | SEVERE WEATHER |
13062 | DUNWOODIE SOUTH(345KV) LOAD POCKET |
13070 | HIGH VOLTAGE AT |
13071 | LOW VOLTAGE AT |
13072 | MARCY |
13073 | EDIC |
13074 | NEW SCOTLAND |
13075 | MEYER |
13076 | ROSETON |
13077 | OAKDALE |
13078 | HUNTLEY |
13079 | ROCHESTER |
13090 | CONTROL ERROR |
13091 | 10-MINUTE SYNCHRONOUS RESERVE SHORTAGE |
13092 | OPERATING RESERVE SHORTAGE |
13500 | Bid must provide at least one MW and $ energy block point. |
13501 | Cannot skip Energy MWs or Energy $/MW. |
13502 | Energy MW and $/MW must be entered in the blocks in ascending order. |
13503 | Cannot enter more than 11 Dispatch MW or Dollar points. |
13505 | ISO-Committed bid cannot have self-commit segments. |
13506 | Self-Committed DAM bid must have 4 Self-Commit MWs with the same value. |
13507 | Self-Committed HAM must have 4 Self-Commit MWs. |
13508 | Must have 4 self-commit MWs or have none of them. |
13510 | Last Bid Energy Curve MW value must be >= UOL(e). |
13511 | UOL(n) must be >= the UOL(n) from accepted DAM bid. |
13512 | UOL(e) must be <= the relevant Max Summer/Winter UOL. |
13513 | UOL(e) of submitted bid must be >= sum of DAM accepted energy and reserves and regulation schedules. |
13514 | Minimum Generation Cost cannot be null. |
13515 | In-City generators can only bid zero 10min-spin $/MW in DAM. |
13516 | Self-Committed Flexible MW must be >= bid Minimum generation MW and <= UOL(e)-1. |
13518 | Self-Committed HAM bid's Self-Commit MW must >= accepted Self-Commit MW00 in DAM. |
13521 | Start-up cost must be <= accepted start-up cost in DAM bid |
13522 | Flexible bid in HAM can only bid zero or null 10min-spin $/MW. |
13523 | 10min-spin $/MW is required and must be >= 0. |
13524 | Flexible bid in HAM can only bid zero or null 10min-nonsynch $/MW. |
13525 | 10min-nonsynch $/MW is required and must >= 0. |
13526 | Flexible bid in HAM can only bid zero or null 30min-spin $/MW. |
13527 | 30min-spin $/MW is required and must be >= 0. |
13528 | Flexible bid in HAM can only bid zero or null 30min-nonsynch $/MW. |
13529 | 30min-nonsynch $/MW is required and must >= 0. |
13530 | Fixed bid can only bid null Regulation Availability MW. |
13531 | Fixed bid can only bid null Regulation Availability $/MW. |
13532 | Fixed Bids can not bid Regulation |
13533 | Regulation Capacity MW must be <= 5 * generators Regulation Capacity response rate. |
13534 | GT units must have zero Minimum Generation MW and Cost. |
13535 | Bids for GT units cannot contain more than 2 MW and $/MW points on the Bid Energy Curve. |
13536 | For GT Units, First Bid Energy Curve MW value must = UOL(n) and Last Bid Energy Curve MW value must = UOL(e). |
13537 | Regulation Capacity MW, Regulation Capacity $/MW and Regulation Movement $/MW must all be >= 0 or null. |
13540 | UOL(n) must be >= Minimum Generation MW. |
13541 | Minimum Generation MW cannot be null. |
13542 | Self-Committed Fixed bid's self-commit MWs must be >= Minimum generation MW and <= UOL(e). |
13543 | Minimum Generation MW must be >= generator's physical min gen. |
13544 | The bid schedule type cannot be changed from the accepted DAM bid. |
13545 | Fixed bid can only bid null 10min-spin $/MW. |
13546 | Fixed bid can only bid null 10min-nonsynch $/MW. |
13547 | Fixed bid can only bid null 30min-spin $/MW. |
13548 | Fixed bid can only bid null 30min-nonsynch $/MW. |
13561 | UOL(e) and UOL(n) cannot be null. |
13562 | 10Min Spin $/MW is required and must be >= 0 and <= the cap. |
13580 | HAM can only bid ISO-Committed Flexible or Self-Committed Flexible bid type when ISO-Committed Flexible bid was accepted in DAM. |
13581 | HAM can only bid Self-Committed Flexible bid type when Self-Committed Flexible bid was accepted in DAM. |
13582 | HAM can only bid Self-Committed Fixed or ISO-Committed Fixed bid type when Self-Committed Fixed bid was accepted in DAM. |
13583 | HAM can only bid Self-Committed Fixed or ISO-Committed Fixed bid type when ISO-Committed Fixed bid was accepted in DAM. |
13584 | Regulation Only Provider Units Must Bid ISO Committed Flex. |
13585 | Regulation MW cannot be greater than UOL(n). |
13586 | Regulation Only Provider Bids Regulation MW value must be greater than 0. |
13590 | Customer is suspended from DSASP market due to DSASP credit deficiency. |
15000 | User not authorized to bid in DAM. |
15001 | User not authorized to bid in HAM. |
15002 | Unknown return value "<P1>" from gen_bid_authority. |
15003 | Bid times invalid. Bid interval must include an hour that may be evaluated. |
15004 | Bid times invalid. Bid submitted after HAM closed. (NOTE: 4 digit year is required) |
15005 | Bid times invalid. Bid submitted too many days in advance. (NOTE: 4 digit year is required) |
15006 | For the DAM, the expiration time must be some time in the future between the DAM posting and the HAM closing. |
15007 | Unknown return value "<P1>" from check_gen_bid_times. |
15008 | Invalid number of incremental dispatch energy blocks "<P1>". |
15009 | Invalid number of incremental dispatch energy curve points "<P1>". |
15010 | Invalid bid curve format indicator "<P1>". The valid values are "B" or "C". |
15011 | Hour 25 cannot be submitted for this day. Date is not for the fall transition day. |
15012 | Cannot indicate that the date is for the second hour 1 unless the date is for hour 1. |
15013 | Duration must be greater than zero. |
15015 | Generator not qualified to bid ISO-Committed Fixed bids in HAM Market. |
15016 | Self/ISO-Commited Flex bids are not allowed for 15-Minute Qualified Generators |
15020 | Validation not done: DAM generator bid with bbs id "<P1>" not found. |
15030 | Validation not done: HAM generator bid with bbs id "<P1>" not found. |
15040 | User not authorized to delete DAM bids. |
15041 | User not authorized to delete HAM bids. |
15042 | User not authorized to delete bid for specified generator. |
15043 | Unknown return value "<P1>" from gen_bid_authority. |
15044 | Invalid market type "<P1>". |
15045 | DAM bid not found. Cannot delete. |
15046 | HAM bid not found. Cannot delete. |
16001 | Bid data can only be updated in the Historic database by Grid accounging staff with the BBOX_GRID_ACCOUNTING_HIST_ROLE. |
16002 | Bid can only be updated historically if it was accepted or modified. |
16003 | Error, No bid found during update. |
16004 | No Changes have been made to the bid parameters. |
16010 | Bid has been updated historically to change the fixed_minimum_block_dollars. |
16011 | Bid has been updated historically to change the start up cost. |
16012 | Bid has been updated historically to change the down time. |
16020 | Bid has been updated historically by the Market Monitoring Unit. |
16021 | Bid data can only be updated in the Historic database by MMU staff with the BBOX_MMU_HIST_ROLE. |
16022 | Bid has been updated historically for Customer Settlements. |
16023 | Bid has been updated historically by Market Mitigation and Analysis. |
Message ID | Message |
22002 | Contact ISO Operations and obtain required ISO Transactions ID. |
22003 | Transaction contact informset to user contact. |
22004 | No MW value entered for a bid that does not have implicit spinning reserve. |
22005 | Transaction bid energy MWs must be > 0. |
22012 | ISO Transaction ID does not exist in IS+. |
22013 | ISO Transaction ID does not match IS+. |
22014 | EDC Area of Source Bus does not match IS+ From Company. |
22015 | EDC Area of Sink Bus does not match IS+ To Company. |
22016 | Subzone Point ID of Source Bus does not match IS+ From Load Zone. |
22017 | Subzone Point ID of Sink Bus does not match IS+ To Load Zone. |
22050 | Source Bus is not a Generator or Load Bus. |
22051 | Sink Bus is not a Generator or Load Bus. |
22052 | HAM transaction bid's source and sink buses not the same as DAM transaction bid's. |
22100 | Source Bus ID does not belong to a generator. |
22101 | Seller automatically confirmed. |
22102 | Buyer automatically confirmed. |
22103 | Sink Bus is not a load bus. |
22200 | ISO Transaction ID Required. |
22201 | ISO Deal Reference ID Required. |
22206 | Source and Sink Ids not in alignment for Linked Transaction. |
22207 | Energy Fixed Block MW not equal for all Linked Transactions. |
22208 | Transaction Seller not Confirmed. |
22209 | Transaction Buyer not Confirmed. |
22210 | This transaction was created by the NYISO as a result of an external generator bidding and being scheduled into the NYISO LBMP Market and is for NYISO schedule coordination only. It can not be modified by Market Participants. |
22211 | This transaction was created by the NYISO as a result of an external bus bidding and being scheduled into the NYISO LBMP Market and is for NYISO schedule coordination only. It can not be modified by Market Participants. |
22300 | HAM bid created from approved DAM schedule. |
22301 | No existing HAM bid; copied from DAM bid. |
22302 | HAM bid created in pre-HAM processing from DAM schedule. |
22303 | HAM bid was not validation passed at the time of pre-ham evaluation, it was replaced with DAM schedule. |
22304 | Error Updating DAM bid status to accepted. Transaction id <P1>, Date hr <P2>. |
22305 | Error Updating HAM bid using DAM bid values. Transaction id <P1>, Date hr <P2>. |
22400 | This Transaction was created by NYISO as a result of Schedule Coordination in HAM Transaction Confirmation process. |
22401 | DAM SCUC Scheduled MW Curtailed by Neighboring Control Area in DAM Checkout Process. |
22402 | Transaction Schedule modified as part of NYISO Locational Curtailment. |
22403 | Transaction Schedule modified as part of NYISO Interface Curtailment. |
22404 | Transaction Schedule modified as part of NYISO Transaction Reinstatement |
22405 | HAM Checkout Modified Schedule |
22406 | RTC Modified Schedule |
22407 | Evaluation fully accepted transaction. |
22408 | Evaluation fully rejected uneconomical transaction. |
22409 | Evaluation partially accepted marginal cost transaction. |
22410 | Evaluation partially to fully accepted transaction due to security constraints. |
22411 | Evaluation partially to fully rejected transaction due to security constraints. |
22412 | Evaluation partially to fully rejected transaction due to DNI ramp constraints. |
22413 | Not Evaluated. |
22414 | Evaluation suspended; reverting to previous schedule due to NYISO security. |
22415 | Evaluation suspended; schedule fully rejected due to NYISO security. |
22420 | Evaluation rejected non-firm transaction due to LBMP price comparison. |
22421 | Evaluation found source generator unavailable for the non-firm transaction. |
22422 | Evaluation found zero dispatchable MW for the non-firm transaction. |
22423 | Evaluation fully accepted non-firm transaction. |
22424 | Evaluation partially to fully rejected non-firm transaction due to DNI ramp constraints. |
22425 | Evaluation partially to fully rejected non-firm transaction due to interface security constraints. |
22430 | Transaction Schedule modified as part of NYISO ICAP Curtailment. |
22431 | NERC Tag has been Changed. |
22600 | DAM Transaction Bid Curve $/MW value exceeds Import/Wheel price cap. |
22601 | DAM Transaction Bid Curve $/MW value is less than Import/Wheel negative price cap. |
22602 | DAM Transaction HAM bid price exceeds HAM Import/Wheel price cap. |
22603 | DAM Transaction HAM bid price is less than HAM Import/Wheel negative price cap. |
22604 | DAM Transaction Bid Curve $/MW value exceeds Export price cap. |
22605 | DAM Transaction Bid Curve $/MW value is less than Export negative price cap. |
22606 | DAM Transaction HAM bid price exceeds HAM Export price cap. |
22607 | DAM Transaction HAM bid price is less than HAM Export negative price cap. |
22608 | HAM Transaction Bid Curve $/MW value exceeds Import/Wheel price cap. |
22609 | HAM Transaction Bid Curve $/MW value is less than Import/Wheel negative price cap. |
22610 | HAM Transaction Bid Curve $/MW value exceeds Export price cap. |
22611 | HAM Transaction Bid Curve $/MW value is less than Export negative price cap. |
22612 | Certain users are not authorized to view/update existing financial data (Transaction Bid Curve/HAM Bid Price) for this transaction bid. A trust relationship is needed to view/update financial data. Contact NYISO for further information. |
22613 | All MHBT bids for the bid day must have a constant Energy Profile MW. |
22614 | All MHBT bids for the bid day must have a constant Transaction Bid Curve. |
22800 | DAM Transaction Decrmental Bid $ exceeds price cap. |
22801 | HAM Transaction Decrmental Bid $ exceeds price cap. |
22802 | DAM Transaction Sink Price Cap Bid $ exceeds price cap. |
22803 | HAM Transaction Sink Price Cap Bid $ exceeds price cap. |
22804 | DAM Transaction HAM bid price exceeds HAM Decremental Bid $ price cap. |
22805 | DAM Transaction HAM bid price exceeds HAM Sink Price Cap Bid $ price cap. |
22820 | DAM Transaction Decrmental Bid $ is less than the negative price cap. |
22821 | HAM Transaction Decrmental Bid $ is less than the negative price cap. |
22822 | DAM Transaction Sink Price Cap Bid $ is less than the negative price cap. |
22823 | HAM Transaction Sink Price Cap Bid $ is less than the negative price cap. |
22824 | DAM Transaction HAM bid price is less than HAM Decremental Bid $ negative price cap. |
22825 | DAM Transaction HAM bid price is less than HAM Sink Price Cap Bid $ negative price cap. |
22826 | Transaction Bid Megawatts have been locked as the result of the ICAP call. |
22827 | Transaction Bid has been locked as result of NYISO ICAP call - record deletion not permitted. |
22828 | Transaction Bid has been locked as result of NYISO ICAP call - modification of megawatts and/or price is not permitted. |
22829 | Transaction Bid has been locked as result of NYISO ICAP call - modification of Nerc Tag is not permitted except by persons authorized by financially responsible party (FRP). |
22830 | Invalid Transaction Type entered for ICAP Transaction Bid - must be DAM or HAM bid. |
22831 | Invalid MHBT specification - ICAP Bid cannot be specified as part of a multi-hour block group. |
22832 | DAM Transaction Transmission Reservation Inadequate |
22833 | HAM Transaction Transmission Reservation Inadequate |
22834 | Validation failed, the PSE entered with NERC tag is not an authorized PSE. Contact NYISO if you feel you received this message in error. |
22835 | Validation failed, the RCA entered with NERC tag is not an authorized RCA. Contact NYISO if you feel you received this message in error. |
22836 | Validation failed, the RCA entered with NERC tag does not match Sink provided with Bid. Contact NYISO if you feel you received this message in error. |
22837 | Validation failed, the SCA entered with NERC tag is not an authorized SCA. Contact NYISO if you feel you received this message in error. |
22838 | Validation failed, the SCA entered with NERC tag does not match Source provided with Bid. Contact NYISO if you feel you received this message in error. |
22839 | The NERC tag ID entered with the Bid is already in use for this hour and market. Either the other transaction has to be deleted or ID changed for this to be allowed. Contact NYISO if you feel you received this message in error. |
22840 | Validation failed, the RCA and SCA entered with NERC tag are not allowed to be the same. Contact NYISO if you feel you received this message in error. |
22841 | Transaction bid with source and sink at the same location (within same external subzone) is not allowed. Contact NYISO if you feel you received this message in error. |
22842 | Transaction is associated with an unbalanced trading hub transaction set. A Trading Hub Energy Owner must have a balanced set of VALIDATION PASSED Trading Hub transactions for the same date/market/zone/hour at market close. |
23051 | Generator must be active to authorize user to bid. |
25000 | User is not authorized to submit DAM transactions. |
25001 | User is not authorized to submit HAM transactions. |
25002 | User is not authorized to submit NONFIRM transactions. |
25003 | <P1> External transactions must have all components of nerc_tag. |
25004 | <P1> NonFirm transactions must have null transaction priorities |
25005 | <P1> NonFirm transactions must have nerc_priority between 1 and 6 |
25006 | <P1> Firm DAM & HAM transactions with internal generators must have a non null transaction priority |
25007 | <P1> Firm DAM & HAM transactions with external generators must have null transaction priority |
25008 | <P1> Firm(DAM & HAM) transactions must have nerc_priority = 7 |
25009 | <P1> A transaction contract with these parameters already exists and and you are not authorized to submit transactions for it. Change the user_ref to make a new contract. |
25010 | <P1> A transaction with the NYISO reference as the source must have an external sink. |
25011 | <P1> A transaction with the NYISO reference as the sink must have an external source. |
25012 | User is not authorized to delete or update this transaction. Transaction id, <P1>. |
25013 | Transaction bids exist for this tranasction contract. Transaction bids with transaction id, <P1>, must be deleted first. |
25014 | <P1> A transaction contract with this NERC Tag already exists. |
25017 | The Transaction Type does not match the Contract Type. |
25020 | <P1> Hour 25 cannot be submitted for this date. |
25021 | <P1> Bid status not validation passed,validation failed or Waiting Confirmation. Cannot be updated |
25022 | Error: For " <P1> " hour, Partial data received |
25023 | Error: For " <P1> "hour, Transaction Id is missing or invalid. |
25024 | Error: For " <P1> "hour, Pre-Scheduled flag is invalid, must be Y or N. |
25025 | Error: For " <P1> "hour, Pre-Scheduled flag is inconsistent with the Transaction Contract. |
25026 | Error: For " <P1> "hour, Pre-Scheduled Transactions must be grouped. |
25027 | Error: For " <P1> " hour, HAM evaluation currently in progress. Please resubmit your bid after 1 or 2 minutes. |
25030 | <P1> Generator is not dam fixed energy bid qualified |
25031 | <P1> Generator is not ham fixed energy bid qualified |
25032 | <P1> Bus is not energy bid qualified |
25033 | <P1> Bus is not price cap bid qualified |
25034 | <P1> Must have pse_revision number when NERC TAG parameters have been provided. |
25035 | <P1> Firm DAM & HAM transactions with external generators must have non null decremental dollars |
25036 | <P1> Firm DAM & HAM transactions with internal generators must have null decremental dollars |
25037 | <P1> NonFirm transactions must have null decremental dollars. |
25038 | <P1> For the hour " <P2> " Partial Data Received |
25039 | <P1> Bid times invalid.Must be submitted before DAM closing. (NOTE: 4 digit year is required) |
25040 | <P1> Bid times invalid. Must be submitted before HAM closing. (NOTE: 4 digit year is required) |
25041 | <P1> Bid times invalid. Bids cannot be submitted too many days in advance. (NOTE: 4 digit year is required) |
25042 | <P1> Users organization must be billing qualified for transactions serving external sinks |
25043 | <P1> HAM transactions with a zero bid can only be entered if a non-zero DAM transaction exists. |
25044 | <P1> Export transactions must supply a price cap bid. |
25045 | <P1> External source transactions can not supply a price cap bid. |
25046 | <P1> Only DAM internal transactions can supply a price cap bid. |
25047 | <P1> NonFirm transactions must have null sink price cap dollars. |
25048 | <P1> Bid times invalid. Must be submitted before DAM Transmission Reservation Validation (NOTE: 4 digit year is required) |
25049 | <P1> Bid times invalid. Must be submitted before HAM Transmission Reservation Validation (NOTE: 4 digit year is required) |
25050 | Confirm/Unconfirm not allowed for current bid status. |
25051 | Cannot confirm/unconfirm: Transaction not found. |
25052 | Invalid buyer/seller flag "<P1> ". Must be B or S. |
25053 | Invalid confirmation flag "<P1> ". Must be Y or N. |
25054 | No permission to confirm or un-confirm, user is not the buyer. |
25055 | No permission to confirm or un-confirm, user is not the seller. |
25056 | No permission to confirm or un-confirm, user is not transaction bid qualified for the "<P1>" market. |
25057 | There is already an existing date_hr bid for this transaction contract. |
25058 | The transaction bid has been deleted due to missing OSS confirmation. |
25060 | Cannot delete NONFIRM bid after market closes. |
25061 | Error: User not authorized to delete transaction bid. |
25062 | Bid not found. Cannot delete. |
25063 | HAM bid has schedule. Cannot delete. |
25070 | If Group User Ref provided must have prescheduled set to Y. "<P1>" |
25071 | Group "<P1>" already exists for bid date hour. |
25072 | First hour of profiled bid greater than second hour due to time change selection. For "<P1>" . |
25073 | Zero energy for DAM Transaction bids not allowed. "<P1>". |
25074 | You cannot submit or change a Pre Scheduled Confirmed group that has dates that are prior to Market Close. "<P1>" |
25075 | <P1>. Only Import/Export Transactions are allowed using the above mentioned Proxy Unit. |
25076 | <P1>. Only Wheel-Thru Transactions are allowed using the above referenced Proxy Unit. |
26001 | PJM Adjusted schedule |
26002 | NE Adjusted schedule |
26003 | HQ Adjusted schedule |
26004 | IESO Adjusted schedule |
26005 | NYISO Adjusted schedule |
26006 | PJM NERC - tag mis-match. |
26007 | NE NERC - tag mis-match. |
26008 | HQ NERC - tag mis-match. |
26009 | IESO NERC - tag mis-match. |
26010 | NYISO NERC - tag mis-match. |
26011 | PJM control area is cutting because of : Security. |
26012 | NE control area is cutting because of : Security. |
26013 | HQ control area is cutting because of : Security. |
26014 | OH control area is cutting because of : Security. |
26015 | NYISO control area is cutting because of : Security. |
26016 | PJM control area is cutting because of : Marketer Decision. |
26017 | NE control area is cutting because of : Marketer Decision. |
26018 | HQ control area is cutting because of : Marketer Decision. |
26019 | IESO control area is cutting because of : Marketer Decision. |
26020 | NYISO control area is cutting because of : Marketer Decision. |
26021 | PJM control area is cutting because of : Does Not Have Contract. |
26022 | NE control area is cutting because of : Does Not Have Contract. |
26023 | HQ control area is cutting because of : Does Not Have Contract. |
26024 | IESO control area is cutting because of : Does Not Have Contract. |
26025 | NYISO control area is cutting because of : Does Not Have Contract. |
26026 | PJM control area is cutting because of : Ramp Limited. |
26027 | NE control area is cutting because of : Ramp Limited. |
26028 | HQ control area is cutting because of : Ramp Limited. |
26029 | IESO control area is cutting because of : Ramp Limited. |
26030 | NYISO control area is cutting because of : Ramp Limited. |
26090 | Market Participant did not attach OASIS to NERC tag. |
26101 | PJM Adjusted bid/schedule |
26102 | NE Adjusted bid/schedule |
26103 | HQ Adjusted bid/schedule |
26104 | IESO Adjusted bid/schedule |
26105 | NYISO Adjusted bid/schedule |
26106 | PJM NERC - tag mis-match. |
26107 | NE NERC - tag mis-match. |
26108 | HQ NERC - tag mis-match. |
26109 | IESO NERC - tag mis-match |
26110 | NYISO NERC - tag mis-match. |
26111 | PJM control area is reducing: schedule mis-match. |
26112 | NE control area is reducing: schedule mis-match. |
26113 | HQ control area is reducing: schedule mis-match. |
26114 | IESO control area is reducing: schedule mis-match. |
26115 | NYISO control area is reducing: schedule mis-match. |
26116 | PJM control area is cutting: Marketer Decision. |
26117 | NE control area is cutting: Marketer Decision. |
26118 | HQ control area is cutting: Marketer Decision. |
26119 | IESO control area is cutting: Marketer Decision. |
26120 | NYISO control area is cutting: Marketer Decision. |
26121 | PJM control area is cutting: Does Not Have Contract. |
26122 | NE control area is cutting: Does Not Have Contract. |
26123 | HQ control area is cutting: Does Not Have Contract. |
26124 | IESO control area is cutting: Does Not Have Contract. |
26125 | NYISO control area is cutting: Does Not Have Contract. |
26126 | PJM control area is cutting: Ramp Limited. |
26127 | NE control area is cutting: Ramp Limited. |
26128 | HQ control area is cutting: Ramp Limited. |
26129 | IESO control area is cutting: Ramp Limited. |
26130 | NYISO control area is cutting: Ramp Limited. |
26201 | To match HQ |
26202 | To match NE |
26203 | To match IESO |
26204 | To match PJM |
26205 | To match NYISO |
26211 | Dysinger-East Interface |
26212 | West-Central Interface |
26213 | Moses South Interface |
26214 | Central East Interface |
26215 | Total East Interface |
26216 | UPNY-CE Interface |
26217 | Sprainbrook-Dunwoodie Interface |
26218 | HQ-NYISO Interface |
26219 | NE-NYISO Interface |
26220 | IESO - NYISO Interface |
26221 | PJM-NYISO Interface |
26222 | Central East: NSCOT 99 Bus Contingency |
26223 | Central East: MS Tower Contingency |
26224 | Central East: NE GEN Contingency |
26225 | High Voltage |
26226 | Low Voltage |
26227 | Ramp Limit |
26228 | Thermal Overload |
26229 | Line Flow Contingency |
26230 | Thunderstorm Alert |
26231 | Control Error |
26232 | TLR |
26300 | NYCA DNI constraint is binding. |
26301 | HQ - NYISO interface constraint is binding. |
26302 | NE - NYISO interface constraint is binding. |
26303 | IESO - NYISO interface constraint is binding. |
26304 | PJM - NYISO interface constraint is binding. |
26305 | All MHBT bids for the bid day must have a constant MW quantity. |
26306 | All MHBT bids for the bid day must have a constant Bid price. |
26307 | When entered, MIN_RUN_TIME must be between 2 AND 25, inclusive. |
26308 | Minimum Run Time cannot be applied to INTERNAL transactions. |
26309 | MultiHour Block Transactions and Optional Ham Bid Prices are inactivated. |
26310 | All MHBT bids for the bid day must have a constant Minimum Run Time. |
26315 | HQ individual interface ramp constraint is binding. |
26316 | NE individual interface ramp constraint is binding. |
26317 | IESO individual interface ramp constraint is binding. |
26318 | PJM individual interface ramp constraint is binding. |
26319 | <P1> Invalid User Reference Number. Must not contain the text "Emergency". |
26320 | HQ - Import/Export interface constraint is binding. |
26321 | Certain users are not authorized to view/update existing financial data (Sink Price Cap/Dec $/HAM Bid Price) for this transaction bid. A trust relationship is needed to view/update financial data. Contact NYISO for further information. |
26322 | HQ - Cedars/Dennison interface constraint is binding. |
26323 | NE - Norwalk/Northport interface constraint is binding. |
26324 | A valid NERC tag matching the MIS bid could not be found by Market Close |
Message ID | Message |
100000 | 'Cannot insert/update <P1>, user <P2> is not a NYISO MIS user. |
100001 | 'Cannot insert/update <P1>, user <P2> is not a NYISO MIS administrator. |
100002 | Bus <P1> not found. |
100003 | User <P1> not found. |
100004 | Bid time with minutes other than 00 not allowed. |
100005 | User not authorized to bid specified generator. |
100006 | Cannot delete bid after DAM closed. |
100007 | Cannot delete bid after HAM closed. |
100008 | Cannot delete a bid that is Being Evaluated, Accepted or Rejected. |
100009 | Generator <P1> not found. |
100010 | DST_SCHEDULE table has duplicate rows! |
100011 | Administrator <P1> not found. |
100012 | Load Serving Entity <P1> not found. |
100013 | Organization <P1> not found. |
100014 | Subzone <P1> not found. |
100015 | Zone <P1> not found. |
100016 | Must be either an ISO administrator or the generator's administrator to assign/remove a generator to/from an administrator. |
100017 | Must be either an ISO administrator or the LSE's administrator to assign/remove a LSE to/from an administrator. |
100018 | Must be either an ISO administrator or the organization's administrator to assign/remove an organization to/from an administrator. |
100019 | User's organization does not have permission on the load serving entity that owns the bus. |
100020 | Must be either an ISO administrator or the generator's administrator to assign/remove a generator to/from an organization. |
100021 | User's organization does not have permission on generator. |
100022 | Must be an ISO administrator to assign/remove the billing organization. |
100023 | Must be an ISO administrator to assign/remove the billing organization. |
100024 | Must be either an ISO administrator or the LSE's administrator to assign/remove a LSE to/from an organization. |
100025 | User "<P1>" is not a Bidbox User. |
100026 | HAM bids not purged: HAM generator bid for generator "<P1>" and date hour "<P2>" not found. |
100027 | <P1> can only be registered to a direct customer or guest organization. |
100028 | Cannot delete a HAM bid when an accepted DAM bid exists for the same hour. |
100030 | Passwords entered do not match. Password not changed. |
100031 | Password must be different from username. Password not changed. |
100032 | Username does not exist in the Bidbox database. |
100033 | Must be an administrator of their organization to change the password of another user. |
100034 | Password must start with an alpha(A - Z) character. Password not changed. |
100035 | Organization "<P1>" has exceeded its maximum number of users. |
100036 | User "<P1>" not found. Internal problem processing the new user. |
100037 | The type of upload/download request is invalid. Value passed for type is: <P1>. |
100038 | The Upload process is currently unavailable. Please try again later. |
100039 | The Download process is currently unavailable. Please try again later. |
100040 | You can not run an Upload/Download request of the same type until your previous request has completed. |
100041 | No upload/download control record found for user "<P1>" and request type "<P2>". Internal problem. |
100042 | More than 1 upload/download control record found for user "<P1>" and request type "<P2>". Internal problem. |
100043 | Generator "<P1>" is not active. |
100044 | Bus "<P1>" is not active. |
100045 | Only the Administrator of the Dispatcher Organization can reset Dispatcher Passwords. |
100046 | Interface PTID "<P1>" does not exist in the interfaces table. |
100047 | Subzone P TID "<P1>" does not exist in the subzones table. |
100048 | Integrity constraint on DNI.DIST_FACTOR insert. Either interface id or loadzone_id does not exist in corresponding table. |
100049 | Cannot delete <P1> record with <P2>. The last existing <P3> record for an <P4> cannot be deleted. |
100050 | Cannot delete <P1> record with <P2>. It is not the latest <P3> record. |
100053 | Password must contain at least one non-alphabetic character. Password not changed. |
100054 | Password must be at least 8 characters long. Password not changed. |
100055 | Password must not contain the username. Password not changed. |
100056 | Password can not be changed for an inactive account. Password not changed. |
100057 | Message ID number "<P1>" not defined in the messages table. |
100058 | Schema name trying to change is not a valid schema. |
100059 | No permission to change schema password. |
100060 | Error logging password change. |
100061 | The user does not have the role(synch_oss_data_role) to run Synch proc in update mode. |
100070 | Tie <P1> not found. |
100071 | User's organization is not metering authority for tie. |
100072 | User's organization is not metering authority for subzone. |
100073 | Must be either an ISO administrator or the organization's administrator to insert/update it's metering authority. |
100074 | <P1> can only be registered to an organization which is qualified to submit meter data. |
100075 | This organization, <P1>, is already assigned as the metering authority for <P2>. |
100076 | Cannot deactivated the organization as the bus's metering authority while user are still assigned to the bus |
100077 | Metering authority not found for, <P1>. |
100078 | User's organization is not metering authority for bus. |
100080 | Must be an ISO administrator to update <P1> LSEs. |
100081 | <P1> not found for <P2>: <P3> and LSE: <P4>. |
100082 | Only type 12 generators can be assigned an LSE. |
100083 | Cannot assign an LSE to a generator before the effective date of the DADRP program. |
100084 | <P1> cannot be deleted for <P2>: <P3> and LSE: <P4>. End date is not NULL; can not delete old relationships. |
100085 | To Insert GEN_LSE record START_DATE must be GREATER than latest existing record start_date. |
100086 | <P1> cannot be deleted for <P2>: <P3> and LSE: <P4>. Atleast one relationship must exist. |
100087 | Generator cannot be assigned to LSE that does not have a billing org. |
100088 | Must assign a billing org and set generator limits before turning on bid flags. |
100089 | Must assign a billing org before turning on bid flag. |
100090 | Must be an ISO administrator to insert <P1>. |
100091 | <P1> not found for <P2>: <P3>. |
100092 | Cannot have start effective date be before NYISO startup date: <P1>. |
100093 | Active generators must have billing organization identification. |
100094 | <P1> cannot be deleted for <P2>: <P3>. End date is not NULL; can not delete old relationships. |
100095 | Group generators cannot have bid flags turned on. |
100096 | <P1> cannot be deleted for <P2>: <P3>. Atleast one relationship must exist. |
100098 | Must assign a billing org before turning on <P1> bid flags. |
100099 | Generator must have winter/summer limits before turning on bid flags. |
100100 | Must be an MMU user to update the bid floor price. |
100101 | Bid floor price only valid for type 12 generators. |
100102 | Cannot update the bid floor price prior to current day. |
100103 | Generator Limits table does not yet exist. MMU can not insert first record; this must be done by an ISO administrator. |
100104 | Bid floor price start date is prior to previous generator limits record. Cannot modify. |
100105 | Bid floor price cannot be NULL. |
100106 | <P1> is not Generic User, or is Not Authorized for this action. |
100110 | Must be an ISO administrator to update <P1> GENERATORS. |
100111 | <P1> not found for <P2>: <P3> and BUS: <P4>. |
100112 | <P1> cannot be deleted for <P2>: <P3> and BUS: <P4>. Atleast one relationship must exist. |
100113 | <P1> cannot be deleted for <P2>: <P3> and BUS: <P4>. End date is not NULL; can not delete old relationships. |
100114 | Bus Gen relationship only allowed for Station Power and Metering Point bus load |
100115 | Generator cannot be assigned to a Bus that does not have an LSE. |
100116 | Generator cannot be assigned to a Bus if the Billing Org: <P1> is not active. |
100117 | Cannot assign an Bus to a Generator before the effective date of the Station Power program. |
100118 | Can only update if one and only 1 record exists. |
100119 | Cannot Update In-City Fuel Types while Global Parameter UPDATE_IN_CITY_FUEL_TYPES is set to N |
100120 | Must be a Nyiso User with BBOX_MMU_ROLE to update Fuel Types |
100121 | Generator is defunct. Insert/Update of data not permitted for ptid: "<P1>". |
100122 | Price data for external zones is not allowed. PTID Processed is: |
100123 | Bus is defunct. Insert/Update of data not permitted for ptid: "<P1>". |
100124 | User not allowed to maintain NTAC rates. |
100125 | User not allowed to maintain TSC rates. |
100128 | Delete LSE_BILLING_ORGS record failed. |
100129 | Parameter can not be added to internal buses or generators. |
100130 | Validation Passed Subject to Credit Evaluation. |
100131 | Billing Organization is not credit qualified. |
100132 | Validation Failed due to insufficient credit. |
100133 | Processing Credit Evaluation |
100134 | Credit Batch Process already running. |
100135 | Billing Organization suspended from Virtual Markets. |
100136 | Billing Organization suspended from Energy Markets. |
Message ID | Message |
330000 | Must be an ISO administrator to delete an administrator. |
330005 | Must be an administrator of the admin organization to add an administrator. |
330006 | Oracle user ID: <P1> already exists as a user. Cannot add the same Oracle user ID as both a user and an administrator. |
330007 | An administrator must belong to an ADMINISTRATIVE organization. |
330008 | Only administrators in the ISO Administrative group can be ISO administrator qualified. |
330010 | No administrators deleted. administrators last updated by = <P1> not found. |
330019 | Must assign a Load Serving Entity for <P1> before turning on bid flags. |
330020 | Must be an ISO administrator to delete a Bus. |
330021 | The PTID already exists and cannot be reused. It may be used currently or was used historically by a Bus or Subzone. |
330022 | Billing Organization already has a virtual bus of this type. Second one is not allowed. |
330023 | Bus, <P1>, cannot be assigned to subzone, <P2>. The special subzones can only have special zone load buses assigned to it. |
330024 | <P1>, invalid subzone for special zone load bus, <P2>. It must have a special zone load subzone which has the same name as the zone. |
330025 | Must be an ISO administrator to add a bus. |
330026 | Bus with PTID: <P1> already exists with price cap, interruptible 10 minute and interruptible 30 minute bid flags set to Y. |
330027 | The following bus, PTID: <P1>, can not be assigned to an LSE; it is either the NYISO Reference bus or an external bus. |
330028 | Only one Bus is allowed per external zone. |
330029 | The LSE assigned to the Load must contain a billing organization. |
330030 | Must be an ISO administrator to delete a Generator. |
330035 | Must be an ISO administrator to add a generatior. |
330036 | Proxy generators must be tied to an external zone. |
330037 | Only one Generator is allowed per external zone. |
330038 | The PTID already exists and cannot be reused. It may be used currently or was used historically by another Generator. |
330040 | Must be an ISO administrator to delete a LSE. |
330041 | Cannot delete/update Load Serving Entity ptid unless LOAD_SERVING_ENTITY_CRITICAL_UPDATES_ALLOWED is set to Y.. |
330045 | Must be an ISO administrator to add a load serving entity. |
330050 | No load_serving_entities deleted. load_serving_entities last updated by = <P1> not found. |
330060 | Must be an ISO administrator to delete an organization. |
330065 | Must be an ISO administrator to add an organization. |
330066 | The Organization Name already exists and cannot be reused. It may be used currently or was used historically by another organization. |
330070 | No organizations deleted. Organizations last updated by = <P1> not found. |
330080 | Must be an ISO administrator to delete a Subzone. |
330085 | Must be an ISO administrator to add a subzone. |
330090 | Must be an ISO administrator to delete a user. |
330091 | No users deleted. Users last updated by = <P1> not found. |
330100 | Must be an ISO administrator to delete a Zone. |
330105 | Must be an ISO administrator to add a zone. |
330110 | Tie cannot have the same To subzone(<P1>) and From subzone(<P2>). |
330111 | The PTID already exists and cannot be reused. It may be used currently or was used historically by a Tie or Generator. |
330112 | Tie cannot have both the To subzone (<P1>) and the From subzone (<P2>) be external. |
330113 | Either to subzone <P1> or from subzone <P2> or both not found. |
330114 | Subzone <P1> is controllable and it is already been assigned to tie <P2>. |
330115 | Must be an ISO administrator to add a tie. |
330116 | Cannot inactivate or delete <P1> when meter MWs have previously been submitted. |
330117 | Cannot update the TO and FROM subzone. |
330120 | Must be an administrator of the ADMIN organization to change administrator information other than contact information. |
330121 | Must be an administrator of the ADMIN organization or the administrator himself or herself to change administrator information. |
330122 | Only administrators are allowed to update this information. |
330123 | Cannot remove permission to administer PEs. Administrator is currently an administrator of a PE. |
330124 | Cannot remove permission to administer Guest Organizations. Administrator is currently an administrator of a Guest organization. |
330125 | Cannot remove permission to administer Administrative Organizations. Administrator is currently an administrator of an Administrative organization. |
330126 | Cannot remove permission to administer Interface Organizations. Administrator is currently an administrator of an Interface organization. |
330127 | Cannot remove permission to administer NY ISO Organizations. Administrator is currently an administrator of a NY ISO organization. |
330128 | Cannot remove permission to administer generators. Administrator is currently an administrator of a generator. |
330129 | Cannot remove permission to administer LSEs. Administrator is currently an administrator of a LSE. |
330130 | Cannot inactivate the administer. The Administrator is currently an administrator of one or more generators. Must remove the generator(s) from the administrator before inactivating the administrator. |
330131 | Cannot inactivate the administer. The Administrator is currently an administrator of one or more LSEs. Must remove the LSE(s) from the administrator before inactivating the administrator. |
330132 | Cannot inactivate the administer. The Administrator is currently an administrator of one or more organizationss. Must remove the Organization(s) from the administrator before inactivating the administrator. |
330133 | Oracle user ID can not be changed. Mark the current administrator inactive and create a new administrator. |
330134 | Cannot remove permission to administer NYISO Observer organizations. Administrator is currently an administrator of an NYISO Observer organization. |
330135 | Cannot remove permission to administer MAs. Administrator is currently an administrator of a MA. |
330140 | Must be an ISO administrator to update bus information. |
330141 | LSE Cannot be modified unless it was blank. |
330142 | Cannot inactivate a Load that has <P1> for days greater than or equal to yesterday. |
330143 | Can't change bus ptid, subzone or load type of a bus unless BUSES_CRITICAL_UPDATES_ALLOWED is set to Y. |
330144 | Changing the Subzone for this bus causes the Billing Organization to have a second virtual bus of the same type in the same zone. |
330149 | GEN_BILLING_ORG START_DATE Can't be BackDated if Global Parameter GEN_BILLING_ORG_BACKDATE_ALLOWED = N |
330150 | Must be an ISO administrator to change generator information other than contact information. |
330151 | Must be an ISO administrator or an administrator of the generator to change generator information. |
330152 | Can't change generator type to 'Group Unit'; generator is currently registered to organization(s). |
330153 | Can't change generator parameters that would cause Vaildation Passed DAM bids to become Validation Failed. Have the users delete their validation passed DAM bids for Date Hr: "<P1>" in order to change this data. |
330154 | Cannot inactivate a Generator that has <P1> for days greater than or equal to yesterday. |
330155 | Cannot change billing org to null if there are regestired organizations. |
330156 | Cannot inactivate a Generator that has assigned administrators. |
330157 | Can't change generator parameters that would cause Validation Failed DAM bids to become Validation Passed. Have the users delete their validation failed DAM bids for Date Hr: "<P1>" in order to change this data. |
330158 | Can't change generator parameters that would cause Validation Passed HAM bids to become Validation Failed. Have the users delete their validation pased HAM bids for Date Hr: "<P1>" in order to change this data. |
330159 | Can't change generator parameters that would cause Validation Failed HAM bids to become Validation Passed. Have the users delete their validation failed HAM bids for Date Hr: "<P1>" in order to change this data. |
330160 | Must be an ISO administrator to change load serving entity information other than contact information. |
330161 | Must be an ISO administrator or an administrator of the load serving entity to change load serving entity information. |
330162 | Selected billing organization not qualified as a billing organization. |
330163 | LSE Cannot be inactivated when it has associated Loads. |
330164 | Cannot remove billing org id when there are associated buses. |
330165 | Cannot remove billing org id when LSE is still registered to organizations. |
330166 | Changing the Billing Organization for this LSE causes the Billing Organization to have a second virtual bus of the same type in the same zone. |
330169 | Must be an ISO administrator to change primary contact information. |
330170 | Must be an ISO administrator to change organization information other than contact information. |
330171 | Must be an ISO administrator or an administrator of the organization to change organization information. |
330172 | Cannot make an organization inactive when one or more of its users is active. |
330173 | Cannot revoke an organization''s permission to submit <P1> when one or more of its users has that permission. |
330174 | Cannot set billing organization qualified flag to N. Organization is the billing organization for one or more generators. |
330175 | Cannot set billing organization qualified flag to N. Organization is the billing organization for one or more load serving entities. |
330176 | Cannot set organization type to a type that one of the administrators is not authorized to administrate. |
330177 | Not allowed to change org type for this organization |
330178 | Cannot change org_type_id from 8. Org is the current Meter Authority for a BUS, GEN, SUBZONE, or TIE. |
330179 | User is only allowed to update the VB Credit Limit or the UCAP Posted Collateral. |
330180 | Must be an ISO administrator to update subzone information. |
330181 | Subzone data cannot be updated unless ALLOW_SUBZONE_UPDATE is set to Y. |
330182 | Metering Authority Effective Date cannot be backdated unless parameter ALLOW_METER_AUTHORITY_CHANGE is set to Y |
330183 | Internal subzones cannot have their controllable_flag set to Y. |
330184 | Subzone <P1> is assigned to multiple ties; therefore it cannot be made controllable. |
330190 | Must be an ISO administrator to update zone information. |
330191 | Zone data cannot be updated unless ALLOW_ZONE_UPDATE is set to Y. |
330200 | You cannot update gen ptid or gen type unless GENERATOR_CRITICAL_UPDATES_ALLOWED is set to Y. |
330201 | Cannot Inactive or Delete when there is Meter data. |
330210 | Cannot change password or lock account because user does not exist. |
330211 | Error processing user change, either the role, user or grant was in error. |
330212 | Must be an administrator of the ISO Administrative org and have the ISO_FLAG set to Y to modify user roles or lock accounts. |
330213 | Error granting role. The Role does not exist in the database. |
330214 | Cannot grant roles to accounts that are locked, use change password to unlock the account. |
330301 | Must be an ISO Administrator to modify Purpa Generators/Transactions |
330302 | Purpa Generator Contract overlaps the start and end dates of another purpa contract. |
330303 | No Purpa Generator contract found for that Generator/Start date. |
330304 | Purpa Contract not found for update. |
330305 | Generator must be linked to a Station Power Bus. |